D2050YQ Fully Automatic Corrugated Board Die-Cutting and Stripping Machine
Built for large corrugated sheets, the D2050YQ combines leading edge feeding, controlled sheet registration, high-pressure flatbed die cutting, automatic waste stripping and organized delivery in one continuous production process.
Built for Corrugated Packaging Jobs That Demand More Capacity
The D2050YQ is designed for packaging manufacturers processing large corrugated sheets that are difficult to feed, register and strip consistently on smaller machines.
It supports E, B, C, A and AB flute corrugated board with a material thickness of up to 8.5 mm. The continuous production layout reduces dependence on manual feeding while keeping sheet transport, die cutting, waste removal and delivery within a coordinated workflow.
Suitable Applications
- Corrugated shipping cartons
- Retail and display packaging
- Industrial product packaging
- Die-cut corrugated inserts and dividers
- Large-format transport packaging
- Single-wall and double-wall corrugated products
A Practical Fit When
- Large sheets exceed the capacity of standard die-cutting equipment
- Manual feeding restricts production consistency
- Waste stripping creates a separate labor bottleneck
- Multiple corrugated flute grades must be processed
- The factory needs a more integrated converting workflow
From Corrugated Sheet Feeding to Organized Delivery
Leading Edge Feeding
Corrugated sheets enter the machine through a controlled leading edge feeding system.
Sheet Registration
Front and side positioning components align each sheet before die cutting.
High-Pressure Die Cutting
The flatbed die-cutting unit applies controlled pressure across the working area.
Waste Stripping
The selected stripping configuration separates designated waste from the finished sheet.
Sheet Delivery
Finished sheets are aligned, collected and prepared for the next production stage.
Stable Feeding and Registration for Large Corrugated Sheets
Large corrugated sheets can vary in thickness, flatness and surface condition. The D2050YQ feeding system is designed to move these sheets into production with controlled contact and consistent forward movement.
The sheet transport area combines feeding control, double-sheet detection and adjustable positioning components. Front and side registration help bring each sheet into the required position before it enters the die-cutting section.
- Leading edge feeding for corrugated sheets
- Adjustable feeding control for different board conditions
- Photoelectric double-sheet detection
- Front and side registration
- Adjustable rubber and brush wheels
- Wear-resistant sheet transport components
- Left and right positioning adjustment
A Rigid Die-Cutting Platform for Large Corrugated Formats
The D2050YQ delivers up to 450 tons of working pressure across a maximum die-cutting area of 2050 × 1400 mm. Its pressure-bearing structure is designed to support demanding corrugated converting work while maintaining a specified die-cutting accuracy of ±0.3 mm.
A controlled intermittent drive coordinates sheet movement with the die-cutting cycle. Pneumatic plate locking and positioning adjustment support tooling setup, while the lubrication system supplies the main transmission during operation.
- Up to 450 tons of working pressure
- 2050 × 1400 mm maximum die-cutting area
- QT600-3 ductile iron body structure
- Controlled intermittent transmission
- Pneumatic plate locking
- Fine positioning adjustment
- Centralized lubrication for the main transmission
- Operating status displayed through the control interface
Stripping Configurations Matched to the Finished Carton Layout
Waste removal can become a separate production bottleneck after large-format die cutting. The D2050YQ can be configured with a stripping solution selected according to the carton structure, die layout and required waste-removal result.
Plate-type and pin-type stripping approaches are available for different jobs. The stripping frames are positioned to remove specified internal cutouts and surrounding waste while retaining the finished corrugated product.
Plate-Type Stripping
Suitable for jobs that require structured waste removal using a prepared stripping plate and matched tooling.
Pin-Type Stripping
Provides adjustable stripping positions for jobs with different internal openings and perimeter waste patterns.
Organized Sheet Delivery with Centralized Machine Control
Delivery System
The delivery section receives finished sheets after stripping and keeps the pile organized for removal. Air-assisted alignment, pile lifting control and sheet monitoring help maintain orderly collection across different corrugated board conditions.
Control and Protection
The operator interface brings machine status and operating controls into one location. Sensors monitor key sheet-handling points, while transmission protection and centralized lubrication support reliable daily operation.
- Air-assisted sheet alignment
- Automatic delivery pile lifting
- Sheet collection monitoring
- Main-chain protection
- Automatic chain lubrication
- Sampling during production
- Counting and labeling configuration
- Centralized operator interface
- Photoelectric monitoring at key positions
- Emergency and operating safety controls
D2050YQ Specifications and Machine Configuration
| Item | Specification |
|---|---|
| Die-Cutting Type | Automatic flatbed die cutting |
| Maximum Sheet Size | 2070 × 1420 mm |
| Minimum Sheet Size | 800 × 700 mm |
| Maximum Die-Cutting Size | 2050 × 1400 mm |
| Minimum Gripper Margin | 8 mm |
| Maximum Working Pressure | 450 tons |
| Compatible Material | Corrugated board up to 8.5 mm |
| Supported Flute Grades | E, B, C, A and AB flute |
| Die-Cutting Accuracy | ±0.3 mm |
| Maximum Working Speed | Up to 3,500 sheets/hour |
| Pre-Stacking Height | 600 mm |
| Delivery Pile Height | 1300 mm |
| Main Motor Power | 30 kW |
| Rated Power | 61 kW |
| Approximate Machine Weight | 48 tons |
Actual production speed depends on board condition, sheet size, die layout, stripping requirements and operator setup.
- Pneumatic clutch system
- PLC and operator control interface
- Main drive motor
- Feeding and delivery motors
- Servo-controlled adjustment
- Photoelectric detection
- Vacuum and pneumatic components
- Intermittent transmission mechanism
- Drive and transport chains
- Centralized lubrication system
- Bearings and rotary components
- QT600-3 ductile iron machine body
Final component brands and model numbers are stated in the confirmed technical proposal. Equivalent components of equal or higher quality may be used when equipment is updated.
The final supply list is confirmed with the quotation and machine configuration. It may include installed die-cutting components, an additional die frame, gripper components, stripping tooling, adjustment components and a machine toolbox.
Plan the Foundation Utilities and Operating Space in Advance
A machine of this size requires more than a clear floor area. Foundation conditions, electrical supply, compressed air, service access, operator movement and unloading routes should be reviewed before shipment.
DAIS provides an installation drawing based on the confirmed machine configuration. The drawing should be checked against the customer’s factory layout before foundation and utility work begins.
- Confirm the final machine installation drawing
- Review floor or foundation requirements
- Reserve operator and maintenance access
- Confirm electrical capacity and connection points
- Prepare the compressed-air connection
- Check factory doors, internal roads and unloading access
- Plan lifting and positioning equipment
- Coordinate installation timing with the production schedule
Worldwide Shipping Planned for Large-Format Machinery
Every D2050YQ shipment is planned around the final machine configuration, destination, unloading conditions and installation schedule. DAIS coordinates packing, heavy-equipment loading, shipping documents and post-arrival preparation to support a smoother delivery process.
Export Packing
The packing plan is prepared according to the final machine configuration and long-distance transport requirements.
Loading Plan
Machine modules, lifting points, loading sequence and unloading requirements are reviewed before dispatch.
Shipping Coordination
Transport arrangements and required shipping documents are confirmed with the customer and appointed freight forwarder.
Arrival and Installation Preparation
Site readiness, unloading resources and installation schedules are coordinated before the equipment arrives.
Large-Format Machinery Backed by In-House Manufacturing
Zhejiang Dais Printing Machinery Co., Ltd. has developed and manufactured printing and post-press equipment since 1993. Our 50,000-square-meter manufacturing base is equipped with more than 100 sets of CNC production equipment.
Five-face gantry machining centers, high-precision vertical machining centers and robotic plasma cutting systems support the machining of large structural and transmission components. Critical assemblies are inspected throughout production and verified during machine testing before shipment.
DAIS equipment is now supplied to customers in more than 50 countries and regions.
- Established in 1993
- 50,000 m² manufacturing base
- More than 100 sets of CNC equipment
- Large-component machining capability
- Multiple national patents
- Equipment supplied to over 50 countries and regions
Technical Support from Site Preparation to Daily Production
Support for a large die-cutting machine begins before the equipment reaches the customer’s factory. DAIS coordinates site preparation information, commissioning arrangements and operator training according to the agreed project scope.
After production begins, customers can contact the technical team for operation, maintenance and spare-parts support.
Before Shipment
Configuration review, machine testing and site-preparation information.
Installation and Commissioning
Installation and commissioning arrangements are confirmed in the sales contract.
Operator Training
Guidance covering machine operation, routine adjustment, safety and preventive maintenance.
Warranty Support
A 12-month warranty is provided under the agreed terms when the machine is operated and maintained correctly.
Continued Parts Support
Technical assistance and replacement parts remain available after the warranty period.
Frequently Asked Questions About the D2050YQ
What corrugated board can the D2050YQ process?
The machine is specified for E, B, C, A and AB flute corrugated board with a material thickness of up to 8.5 mm. Final suitability should also be evaluated according to board flatness, surface condition and die-cutting layout.
What are the maximum sheet and die-cutting sizes?
The maximum sheet size is 2070 × 1420 mm, while the maximum die-cutting area is 2050 × 1400 mm.
How should the stripping system be selected?
The stripping configuration should be selected according to the carton structure, internal openings, perimeter waste and die layout. Customers can send product drawings for technical review.
Does the maximum speed apply to every job?
The rated maximum speed is up to 3,500 sheets per hour. Actual production speed depends on sheet size, corrugated board condition, die layout, stripping complexity and operating setup.
What information is required for machine configuration?
Please provide the sheet size range, flute type, board thickness, finished product drawing, required output and waste-stripping requirements.
What should be prepared before installation?
The customer should review the installation drawing, foundation conditions, electrical supply, compressed air, service access and unloading route before the machine arrives.
How is the machine prepared for international shipment?
The transport plan is prepared after reviewing the final configuration, destination, unloading conditions and installation schedule. Packing, loading and shipping documents are coordinated before dispatch.
Does DAIS provide installation and operator training?
Installation, commissioning and training services can be arranged according to the project location and the terms confirmed in the sales contract.
Configure the Machine Around Your Corrugated Packaging Jobs
Tell us what you need to die cut, the corrugated board you use and the output you expect. Our team will review the application and prepare a recommended D2050YQ configuration, installation requirements and project proposal.
Please Include
- Maximum and minimum sheet dimensions
- Corrugated flute grade and board thickness
- Finished carton or die-line drawing
- Required production output
- Full stripping requirements
- Destination country and installation conditions