D1060S Automatic
Die Cutting Machine
High-precision 1060×760 mm automatic platen die cutter for folding cartons and corrugated packaging. The DAIS D1060S is a standard, ready-to-order production model built for converters and printers who need stable feeding, reliable pressure, and consistent die-cutting accuracy in daily industrial use.
- Up to 6,500 sheets/hour with stable 0.1 mm die-cutting accuracy.
- 300T die-cutting pressure with heavy-duty QT600-3 ductile iron structure.
- Suitable for white board and corrugated board up to 4 mm.
D1060S Automatic
Die Cutting Machine
High-precision 1060×760 mm automatic platen die cutter for folding cartons and corrugated packaging. The DAIS D1060S is a standard, ready-to-order production model built for converters and printers who need stable feeding, reliable pressure, and consistent die-cutting accuracy in daily industrial use.
- Up to 6,500 sheets/hour with stable 0.1 mm die-cutting accuracy.
- 300T die-cutting pressure with heavy-duty QT600-3 ductile iron structure.
- Suitable for white board and corrugated board up to 4 mm.
Built for Packaging
and Print Finishing
The D1060S is a standard-configured automatic die cutting machine — not a custom engineering project. It is engineered and manufactured to a fixed, proven specification, which shortens lead time, simplifies installation, and ensures consistent production performance from day one.
It is well suited for folding carton production, corrugated packaging, point-of-purchase displays, and general commercial print finishing work. The 1060 mm format accommodates a wide range of substrate sizes and job types common in modern packaging operations.
For converters and print shops seeking a reliable, production-ready die cutter in the 1060 format, the D1060S offers a complete and field-tested configuration — without the complexity, cost, or lead time of a custom machine build.
Key Performance Highlights
Stable Feeder and Accurate Registration
The D1060S feeding system is built around a European-technology Feida suction head with servo-controlled suction angle and height adjustment. This allows the machine to adapt automatically to deformed or warped sheets without manual intervention, maintaining consistent sheet separation even under demanding production conditions.
Double detection ensures that misfeeds and double feeds are identified and rejected before they reach the cutting station. Front and side registration provides accurate, repeatable sheet positioning for tight tolerance die cutting throughout the production run.
- European-technology Feida suction head
- Servo-controlled suction angle and height adjustment
- Adaptive feeding for deformed sheets
- Double detection for misfeed and double-feed rejection
- Fine adjustment of the feeding table
- Accurate front and side registration
Heavy-Duty Platen and High-Precision Drive
The cutting platen is manufactured from QT600-3 ductile iron, a high-strength material that maintains dimensional stability under repeated 300T cutting cycles. Combined with an advanced quenching process, the frame resists deformation over the long service life of the machine.
The drive system pairs a high-strength crankshaft with a worm transmission and 240-degree intermittent mechanism, delivering smooth, precise platen movement. A pneumatic locking device secures the platen position at each cycle, and a forced lubrication system keeps all critical components properly maintained during continuous production.
- QT600-3 ductile iron pressure-bearing structure
- Advanced quenching for long-term frame stability
- High-strength crankshaft and worm drive system
- 240-degree intermittent mechanism
- Pneumatic locking device
- Forced lubrication system
Reliable Electrical Control
The D1060S is equipped with international-grade electrical components throughout, selected for reliability in continuous industrial production environments. The control system is built on a stable PLC platform that delivers consistent, repeatable machine behavior across production shifts.
A 15-inch primary HMI touchscreen gives operators full visibility of machine parameters, production counts, and fault diagnostics. A secondary 7-inch display provides additional monitoring capability at the delivery station. Real-time production data and machine status information reduce operator response time and support more efficient shift management.
- International-grade electrical components
- Stable PLC-based control architecture
- 15-inch main HMI touchscreen
- 7-inch secondary display at delivery station
- Real-time production monitoring
- Machine status visibility for easier operation
Non-stop Delivery and Safer Handling
The D1060S delivery system is designed to maintain output quality throughout high-speed production runs. Automatic paper leveling keeps the delivery pile aligned without operator intervention, while a two-way blowing device ensures cut sheets separate cleanly and settle evenly onto the pile.
Photoelectric paper receiving control and automatic lifting of the delivery table enable non-stop pile removal — allowing operators to clear the delivery station without stopping the machine. Non-stop sampling lets operators pull test sheets at any point during the run, and the system handles both thin and heavy corrugated substrates with equal pile consistency.
- Automatic paper leveling
- Two-way blowing device for clean sheet separation
- Photoelectric paper receiving control
- Automatic lifting of delivery table
- Non-stop sampling during production
- Stable collection of both thin and thick substrates
Machine Dimensions and Installation Layout
The D1060S has an overall footprint of approximately 6,823 × 4,048 mm with a height of 2,182 mm and a machine weight of approximately 16 metric tons. Before finalizing your production layout or factory floor plan, we recommend reviewing the full installation drawing with your DAIS technical contact to ensure adequate clearance on all sides for safe operation, maintenance access, and material handling.
Standard Configuration
- Complete machine
- Installed die cutting steel plate
- Two die cutting frames
- Paper gripping tooth row
- Tooth tablets
- Manual waste cleaning machine
- Labeling machine
- Furry wheels
- Rubber wheels for pressing paper
- Toolbox
After-Sales Service and Warranty
The D1060S is covered by a 12-month warranty beginning from the date of installation and commissioning, subject to proper use in accordance with the operating manual. During the warranty period, non-consumable parts that fail under normal operation and are not subject to misuse or human damage are replaced at no charge.
Key structural components are supported for lifetime maintenance. Spare parts remain available after the warranty period, and DAIS technical engineers are available to support installation, commissioning, and troubleshooting for international customers. Overseas buyers are responsible for engineer travel and associated costs.
Why Choose DAIS
DAIS has focused exclusively on printing and post-press machinery since 1993. With more than 30 years of manufacturing experience, a 50,000 m² production facility, and over 100 advanced CNC machining centers including five-face gantry machining centers and high-precision vertical machining centers, we build machines to a standard that converters and printers worldwide rely on for daily production.
The D1060S reflects our core engineering philosophy: select the right structural and electrical components, manufacture to consistent tolerances, and deliver a machine that performs reliably without requiring constant adjustment or customization. The QT600-3 ductile iron frame, precision crankshaft and worm drive, international-grade electrical components, and robust feeding system are not marketing language — they are the result of deliberate engineering decisions made for long-term production stability.
For converters seeking a production-ready 1060-format automatic die cutter, the D1060S is a straightforward choice: a standard, field-tested machine from a manufacturer with the capacity, experience, and after-sales infrastructure to support your operation.
Frequently Asked Questions
Is the D1060S a customized machine or a standard model?
The D1060S is a standard automatic die cutting machine model. It is not a custom-engineered solution, which helps shorten delivery time and simplifies installation while still offering a complete configuration for packaging and commercial printing applications.
What materials can the D1060S handle?
The machine can process white board from 100 g and corrugated board up to 4 mm thickness, making it suitable for folding cartons, corrugated packaging, displays and general commercial work within the 1060 format.
What die cutting accuracy can I expect in daily production?
Under proper installation and maintenance, the D1060S achieves die cutting accuracy of approximately 0.1 mm, supported by its heavy-duty frame, precision crankshaft and worm system, and robust registration controls.
How fast can the D1060S run?
The maximum working speed is up to 6,500 sheets per hour. Actual speed depends on substrate, layout and job complexity.
What kind of after-sales support is available?
DAIS provides a 12-month warranty starting from commissioning, lifetime maintenance support for key structural parts, fast spare parts supply and professional engineer support. Overseas buyers cover engineer-related costs.
Ready to Order or Need More Details?
Our team is available to answer technical questions, confirm delivery timelines, and support your purchasing decision for the D1060S.